Product Description:

The MDD093C-N-020-N2M-130PL1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified for use with digital drive controllers, it converts three-phase power from a servo inverter into controlled rotary motion for axis control in machine tools, handling modules, and printing lines. Closed-loop operation lets the paired drive correct position and speed deviations during load changes. This supports repeatable positioning and steady velocity in applications that require accurate motion over long duty cycles.

The motor uses size code 093, giving it a mid-range frame that balances torque output with manageable overall mass. Its nominal speed is 2000 rpm, allowing the motor to run at a stable synchronous speed during continuous duty with a matching drive. A blocking brake provides 11 Nm of holding torque, which helps keep a vertical or indexing axis in place when drive power is removed. Accurate mounting is supported by a centering diameter of 130 mm for alignment with standard servo flanges. Rotor position is reported by an integrated multi-turn absolute encoder, so the drive retains position information across multiple revolutions and can recover the axis location after power is restored without a reference move.

All power and feedback terminations are located on the left side of the housing, which can simplify cable routing when machine wiring enters from one direction. The detachable connector hardware keeps the connection point accessible and reduces clutter around the motor interface. Control precision is enhanced through digital servo feedback, which sends high-resolution position and velocity data to the drive for accurate regulation. A shaft seal helps protect the bearing area from dust and oil ingress, while the keyway shaft provides secure mechanical engagement with couplings or pulleys.