Product Description:

The MDD093C-N-020-N2M-130PA0 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. This AC servo motor is intended for use with digital drive controllers where closed-loop motion must stay synchronized with process commands. By combining permanent-magnet excitation with electronic commutation, the unit delivers regulated torque and speed for positioning tables, pick-and-place axes, and other industrial automation tasks that require repeatable motion. It is suited for axes that need stable speed regulation and consistent positioning during changing operating cycles.

The motor reaches a nominal speed of 2000 rpm, which suits low- to medium-speed applications while keeping thermal load within the limits of its standard housing. A centering diameter of 130 mm matches compatible flange hardware and supports accurate alignment during mounting. Mechanical output is transmitted through a keyway shaft, permitting straightforward coupling to gears or pulleys. Because the unit is supplied without a holding brake, external holding force is required when the load must remain fixed at standstill. Position data come from an integrated multi-turn absolute encoder, and motion feedback is provided as digital servo feedback (DSF) for direct connection to compatible Rexroth drive controllers.

Cabling enters through a connector interface, and all power, brake, and feedback conductors exit the frame on side A, which helps keep harness routing orderly in compact cabinets. A shaft seal is fitted to limit dust or coolant ingress along the output journal. The motor uses a standard shaft end without a second journal on side B, and size code 093 indicates the frame class used for this housing. Its conventional enclosure supports convection cooling, and the unit is intended for digital drive controller applications such as Rexroth DDS or IndraDrive platforms.