Product Description:

The MDD093C-N-020-N2M-130GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is used with digital drive controllers wherever precise torque and position control are required in industrial automation lines, such as pick-and-place stations, packaging axes, or gantry modules. The unit converts commanded drive currents into regulated mechanical rotation so that coordinated motion sequences can be executed repeatably under closed-loop control. This supports accurate starts, stops, and position holding during automated machine cycles.

The motor has a nominal speed of 2000 rpm, which is its rated operating speed for continuous running. Precise concentric mounting is assisted by a centering diameter of 130 mm, allowing the flange to seat accurately against machine frames and maintain alignment. An electromechanical blocking brake supplies 11 Nm of holding torque, letting vertical or suspended loads remain stationary when power is removed. Position information is generated by an integrated multi-turn absolute encoder and transmitted through digital servo feedback, enabling the drive to track the exact shaft angle across multiple revolutions without battery backup.

The connector-style power and signal terminations emerge on the right side of the housing, which can simplify cable routing in compact machine layouts. Contamination ingress is limited by a shaft seal, while a plain shaft profile eases coupling to backlash-free clamping hubs. Internal construction follows standard balancing quality so residual vibration stays within ISO limits at motor length code C. The housing is the standard version, the shaft end is provided only on side A, and the connection type is a keyed circular connector so power, brake, and encoder leads can be connected without hardwiring. The single shaft-end layout also keeps the output side standardized for direct machine coupling.