MDD093C-N-020-N2M-130GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
45 Seconds
The Bosch Rexroth Indramat MDD093C-N-020-N2M-130GL1 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers and featuring standard housing and balancing. It comes with an integrated multiturn absolute encoder, a plain shaft with shaft seal, and a holding brake torque of 11 Nm. The motor has a centering diameter of 130 mm and a nominal speed of 2000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-020-N2M-130GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into controlled rotary motion for positioning and process axes in automated machinery. Its 093 frame size and C motor length give it a moderate footprint for medium-power installations, and the single shaft end suits direct coupling to gearboxes, pulleys, or belt drives without a second output extension. The motor is intended for applications where the drive must regulate torque, speed, and position with a closed control loop. That makes it suitable for indexing units, feed axes, and handling systems that need repeatable servo response across varying loads.
Standard dynamic balancing helps the rotor run smoothly at a rated speed of 2000 rpm. A centering diameter of 130 mm provides a repeatable pilot surface for flange mounting, which helps the motor seat accurately against the machine interface. The integrated blocking brake delivers 11 Nm of holding torque so parked axes can remain in place when drive power is removed. Power and feedback connections exit on the left side, which can simplify cable routing when adjacent hardware is arranged to that orientation. The motor uses a plain shaft, making it suitable for couplings or transmission elements that clamp directly to the shaft surface.
Electrical connection is made through a connector that mates directly with the drive cable, and the output journal includes a shaft seal to help keep contaminants away from the bearing area. Position information is provided by an integrated multi-turn absolute encoder, so the drive can determine rotor position over multiple revolutions after a power cycle. The feedback channel uses digital servo feedback, which supports precise commutation and stable velocity control in closed-loop operation. Because the encoder is integrated into the motor, installation stays compact and wiring remains limited to the main motor and feedback connections. This arrangement reduces the need for separate external sensing hardware in general industrial use.
Frequently Asked Questions about MDD093C-N-020-N2M-130GL1:
Q: What type of encoder is included in the MDD093C-N-020-N2M-130GL1 motor?
A: The MDD093C-N-020-N2M-130GL1 motor features an integrated multiturn absolute encoder.
Q: What is the nominal speed of the MDD093C-N-020-N2M-130GL1 motor?
A: This motor has a nominal speed of 2000 min⁻¹, suitable for moderate motion applications.
Q: Does the MDD093C-N-020-N2M-130GL1 come with a holding brake, and what is its torque?
A: A blocking brake with a holding torque of 11 Nm is included with this motor.
Q: What is the connection direction and connection type for the MDD093C-N-020-N2M-130GL1 motor?
A: The connection direction for this motor is on the left side and uses a connector type.
Q: What type of shaft and shaft protection features does the MDD093C-N-020-N2M-130GL1 have?
A: This model is equipped with a plain shaft and comes with a shaft seal for protection against contaminants.
