Product Description:

The MDD093C-N-020-N2M-110PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts three-phase current from an inverter into controlled mechanical output for positioning axes, packaging stations, and handling modules. In closed-loop motion systems, the motor supplies repeatable torque and speed so commanded moves can be carried out with accurate starts, stops, and stable running under changing load conditions.

The motor reaches a nominal speed of 2000 rpm, which suits applications that need strong torque at moderate shaft speed. A centering diameter of 110 mm helps align the motor with adjoining machine elements and keeps the mounting position consistent. Load holding after power loss is provided by a blocking brake rated at 22 Nm. Control accuracy is supported by digital servo feedback, which sends position data to the drive for speed and position regulation. All power, brake, and feedback connections exit on Side A, helping keep cable routing in one direction. The rotor is balanced to a standard grade to reduce vibration, and the non-ventilated housing removes heat without an external blower.

An integrated multiturn absolute encoder reports shaft angle across multiple revolutions without requiring a backup battery, so position information remains available after several turns of movement. The electrical interface uses a locking connector that keeps the cable connection secure during operation. Frame size 093 sets the mounting circle and overall housing envelope for medium-inertia applications. Torque is transmitted through a shaft with a keyway, and a shaft seal helps keep oil and contaminants away from the bearing area. Only the primary output shaft is provided, while the B-side remains without a second shaft extension.