Product Description:

The MDD093C-N-020-N2M-110GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for fixed-frame mounting in automated machinery, the unit works with a digital drive controller to generate precise rotary motion that can be adjusted in real time. In material-handling stations, packaging axes, or light machining centers, the motor converts controller current into controlled torque so that speed and position loops remain stable during cyclic industrial tasks. This arrangement supports repeatable motion where accurate speed regulation and positioning are required across changing load conditions.

The motor is rated for a nominal shaft speed of 2000 rpm, allowing the drive to match throughput with the machine cycle rate. A blocking brake integrated at the non-drive end can apply up to 22 Nm of static torque to hold vertical loads when power is removed. Precise concentricity during installation is aided by a centering pilot of 110 mm. Electrical and feedback connections are routed on the left side through a keyed connector, which helps keep cable routing orderly in multi-axis cabinets. Position data are supplied by an integrated multi-turn absolute encoder, and digital servo feedback sends motor status to the control loops. A shaft seal is fitted to help prevent lubricant escape into the enclosure.

Length code C denotes the third housing depth within the family, while size 093 identifies the frame used for this model. The standard housing dissipates thermal losses without auxiliary cooling, which simplifies installation where forced airflow is not required. Classified as a Motor for digital drive controllers, the unit operates with Rexroth DDS or DIAX amplifiers that supply commutated current. A standard shaft end without a side-B extension and the plain shaft geometry permit rigid couplings or belt pulleys to be fitted directly, giving the machine builder flexibility in the driven connection.