Product Description:

The MDD093C-N-020-N2M-110GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where electrical input is converted into precise rotary motion for industrial axes that require repeatable positioning and dependable torque. This type of motor is commonly used on packaging equipment, automated assembly stations, and other coordinated multi-axis systems. Its integrated feedback system allows the connected drive to monitor rotor movement continuously and maintain stable motion during changing load conditions.

The motor uses a centering diameter of 110 mm, which helps align the housing concentrically with machine flanges or gearbox interfaces. Power and feedback conductors exit on side B, allowing cable routing away from the machine working area when the installation requires it. A sealed plug-in connector supports a clean electrical interface and helps protect the connection point during operation. Rotor position is measured by an integrated multi-turn absolute encoder, so position data remains available after power is removed. For holding at standstill, the blocking brake provides 22 Nm of torque and engages automatically when the drive is de-energized.

Feedback is transmitted as digital servo feedback (DSF), which supports closed-loop regulation between the motor and the drive controller. Rated operation is listed at 2000 rpm, making the motor suitable for applications that need moderate speed with substantial torque output. The output member is a plain shaft without a keyway or side-B shaft extension, and a shaft seal helps retain lubricants while limiting the entry of contaminants. The motor uses frame size 093, and length code C gives it a longer active stack for higher continuous torque than shorter versions in the same frame. Standard balancing helps reduce vibration during acceleration and steady running.