Product Description:

The MDD093C-N-020-N2M-110GB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and supplies controlled rotary motion for indexing tables, gantry axes, and conveyor modules in automated production lines. Its housing size suits machines that need moderate torque with accurate positioning, and the connector-based wiring keeps installation straightforward. The motor is well suited for applications that require repeatable starts, stops, and speed changes during automated motion sequences.

The motor reaches a nominal speed of 2000 rpm at its rated operating point. An internal blocking brake provides 11 Nm of holding torque, which supports vertical or inclined mounting when the axis must remain in position. A centering diameter of 110 mm helps align the motor with standard machine mounts. All power and feedback connections exit on side B, which can simplify cable routing in tightly spaced multi-axis assemblies. Position data comes from a multi-turn absolute encoder, so absolute shaft position is available immediately after power-up, even after the axis has been moved while the system was off. The standard housing also helps protect the stator area from coolant splash and dust ingress.

The motor uses a shaft seal to help limit lubricant migration toward the bearing area and to reduce the entry of contaminants. Motion data is transmitted through digital servo feedback (DSF), allowing compatible Indramat controllers to process the signals directly. The motor has frame size 093 and length code C, which place it in a medium-duty package. Standard balancing helps control vibration, while the plain shaft and connector termination support direct coupling and orderly cable connection. The motor has a single shaft end, which keeps the overall length shorter and simplifies guarding around the drive end.