Product Description:

The MDD093C-N-020-N2M-110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in positioning and speed-controlled machinery. By converting controlled electrical input into rotary motion, the motor supports accurate axis movement in material handling, printing, and packaging equipment. Its servo design supports repeatable starts, stops, and speed changes during automated cycles. In closed-loop service, it works with the controller to maintain commanded position and velocity as load conditions change.

Its centering pilot measures 110 mm, which helps seat the housing accurately against the mounting surface and supports stable alignment during operation. Power and feedback leads exit on side B, so cable routing stays at the rear of the machine and the sealed connector interface keeps connections compact. Rotor position and revolution data are captured by an integrated multi-turn absolute encoder, and the closed loop uses digital servo feedback (DSF) for controlled response to commanded motion. At rated operation, the shaft reaches a nominal speed of 2000 rpm. Absolute position tracking can support machine sequences that need the axis location retained between operating states.

The mechanical interface uses a plain shaft and a shaft seal, which helps limit the entry of coolant or airborne particles. The motor is supplied without a blocking brake, so any required holding force at standstill must come from an external device or commanded drive torque. A single shaft end is used, with no extension on the opposite side. The rotor-stator frame is coded 093, and the active stack length is C, giving the motor a moderate overall size. That layout suits machine designs that need a compact servo package while still leaving room for standard couplings and rear cable connections.