MDD093C-N-020-N2M-110GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911263026
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
31 Seconds
The Bosch Rexroth Indramat MDD093C-N-020-N2M-110GA0 is a synchronous motor from the MDD Synchronous Motors series with a nominal speed of 2000 rpm and a centering diameter of 110 mm. It features a standard housing, an integrated multiturn absolute encoder for motor feedback, and comes with a plain shaft and shaft seal. This motor is designed for use with digital drive controllers and uses a connector for side A connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-020-N2M-110GA0 synchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed for direct coupling to digital drive controllers in industrial automation, the unit converts regulated electrical current into precise rotary motion for positioning or velocity-controlled axes. Its C length code and 093 frame size place it in the mid-torque range of the series, making it suitable for medium-inertia loads in packaging lines, material handling systems, or machining centers. This motor type is used where steady torque delivery and accurate feedback are required during repeated motion cycles.
At its nominal operating point, the motor runs at 2000 rpm, allowing the drive system to match machine cycles that require moderate speed with high torque reserve. The centering shoulder diameter is 110 mm, which helps align the motor flange with the mounting surface and keeps radial misalignment low during acceleration. A plain shaft transfers torque without keys, minimizing backlash in direct-coupled gearboxes or timing-belt pulleys. Position data is transmitted through Digital servo feedback (DSF), and the integrated multiturn absolute encoder retains absolute position after power loss so the axis can restart without a homing sequence. This combination supports stable motion control in applications that depend on repeatable positioning.
The motor is supplied without a blocking brake, so applications that need static holding torque must use external clamping or drive torque. Power, feedback, and protective earth conductors enter on Side A, which can simplify cable routing when the motor flange faces the workspace. A single connector carries both drive power and encoder lines, reducing cable complexity compared with separate leads. For contamination control, the front bearing region is protected with a shaft seal. The housing uses a standard closed frame, and the rotor is trimmed to the standard balancing grade to keep vibration low during operation.
Frequently Asked Questions about MDD093C-N-020-N2M-110GA0:
Q: What type of encoder is integrated in the MDD093C-N-020-N2M-110GA0 motor?
A: This model features an integrated multiturn absolute encoder to provide precise position feedback.
Q: What shaft type is present on the MDD093C-N-020-N2M-110GA0?
A: A plain shaft is used on this model, offering a smooth drive interface.
Q: Is the MDD093C-N-020-N2M-110GA0 equipped with a holding brake?
A: This motor does not include a blocking brake.
Q: What is the nominal speed of the MDD093C-N-020-N2M-110GA0 motor?
A: The nominal speed for this motor is rated at 2000 min⁻¹.
Q: What is the connection direction and type for the MDD093C-N-020-N2M-110GA0 motor?
A: Electrical connection for this model is provided by a connector located on Side A.
