Product Description:

The MDD093C-N-020-N2L-130PR2 is a servo motor manufactured for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical input into controlled rotary motion for positioning and speed-regulated duties in automated production lines. The motor combines a blocking brake with a keyed shaft, so it can hold a load at standstill while also supporting repeatable acceleration and deceleration during normal machine operation.

A centering diameter of 130 mm aligns the housing accurately on the machine plate and helps maintain consistent concentricity during installation. The motor reaches a rated speed of 2000 rpm, making it suitable for medium-speed axes that require stable servo control through the working range. When the axis is stopped, the integrated brake provides 22 Nm of holding torque to keep suspended or unbalanced loads in place. Power and feedback connections are oriented to the right, which can simplify cable routing in machine layouts with limited side clearance. A fitted shaft seal helps keep coolant spray and dust away from the front bearing area, which supports reliable operation in demanding industrial environments.

Position data is transmitted through digital servo feedback, allowing the controller to receive precise rotor information for closed-loop speed and position control. The motor uses frame size 093, which places it within a common mid-frame format for compatible mounting hardware and drive system layouts. Torque is transmitted through a keyway shaft end, providing a secure mechanical connection for couplings and driven loads under cyclic operation. Dynamic imbalance is controlled by standard balancing, which helps the motor run smoothly at operating speed. The C-length housing gives the unit a mid-size mechanical profile that fits many automated handling, packaging, and assembly applications without requiring unusual mounting provisions.