Product Description:

The MDD093C-N-020-N2L-130PL2 synchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into rotary motion for position-controlled axes, conveyors, transfer units, and handling modules used in industrial automation. The design combines permanent-magnet excitation with feedback signals so the connected controller can maintain commanded motion profiles under variable load, repeated indexing cycles, and frequent speed changes.

Mechanical interface dimensions begin with a centering diameter of 130 mm, allowing precise alignment with gearboxes or mounting flanges and helping maintain concentric mounting. During operation, the rotor can reach a nominal speed of 2000 rpm, which supports continuous-duty motion in servo applications that require stable velocity. An integrated blocking brake provides a static torque capacity of 22 Nm, securing vertical loads when the drive is de-energized. Position data is returned through digital servo feedback (DSF), providing high-resolution incremental and absolute signals to the controller. The output shaft uses a keyway so torque can be transmitted through a matched hub or coupling without additional locking devices.

Electrical and service connections are routed on the left side of the housing and use a sealed connector interface, which helps keep wiring organized in modular machines. The motor body follows length code C and size code 093, so its envelope matches other units in the series that use the same frame platform. A standard housing and a shaft seal protect internal components from dust and coolant splash, while the shaft end remains standard without a side-B extension to keep inertia low. This layout also leaves the opposite end free of extra projection, which can simplify surrounding mechanical clearances.