Product Description:

Bosch Rexroth Indramat manufactures the MDD093C-N-020-N2L-130PL1, a synchronous servo motor in the MDD Synchronous Motors series. Designed for digital drive controllers, it translates commanded current into precise shaft rotation for positioning tables, pick-and-place axes, and similar automation tasks in industrial environments. The external interface uses a sealed circular connector, which helps protect the electrical connection and supports straightforward installation in enclosed machine layouts. Its intended use includes repeatable positioning and controlled speed regulation during normal machine cycles in automated handling and transfer systems.

The motor reaches a nominal speed of 2000 rpm, which is its rated operating speed under load. To secure vertical axes or hold tooling during power-off states, an integrated brake supplies 11 Nm of static torque. Feedback to the drive is provided through digital servo feedback (DSF), and this encoder returns position data for closed-loop control. Mechanical alignment in the machine frame is aided by a 130 mm centering diameter, while the power and sensor connectors are positioned on the left side of the housing. The housing is the standard version, and a standard shaft end without a side-B extension reduces overhang at the front bearings while keeping the motor compact.

Dynamic balance is set to standard balancing, which helps limit residual vibration while the output rotates. The rotor-stator stack uses length code C, which provides higher continuous torque than shorter versions in the same frame size. A durable shaft seal surrounds the output journal to help keep out coolant spray and dust during normal machine operation. The output geometry uses a keyway so the motor can connect to common coupling hubs. This output form is widely used in industrial machinery and supports secure torque transmission to the driven load.