Product Description:

The MDD093C-N-020-N2L-130PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts regulated electrical input into precise torque and speed for automated axes. This makes the motor suitable for packaging lines, machine tools, and material-handling systems that require repeatable acceleration, controlled positioning, and stable speed regulation. Its servo design supports coordinated motion where rapid changes in speed and direction must remain accurate across repeated cycles. The integrated encoder channel also lets the connected drive monitor rotor position directly, reducing the need for external feedback hardware.

The motor has a rated speed of 2000 rpm, giving the drive a predictable operating point for gear selection and load matching. A centering diameter of 130 mm aligns the housing accurately to the mounting face, which helps maintain concentric installation. Power and feedback connections are arranged on Side B, keeping cables away from the driven shaft in layouts that need clear routing. The blocking brake provides 22 Nm of holding torque so stationary loads can remain in place when the drive is switched off. Torque is transmitted through a shaft with a keyway, allowing common couplings, pulleys, or pinions to be fitted securely.

The motor uses digital servo feedback, so the controller receives position data for closed-loop operation without external sensors. The shaft is supplied with a shaft seal, which helps reduce contamination at the output end and supports use in enclosed industrial equipment. The stator stack has length code C, and the motor uses frame size 093. These dimensions match the mechanical envelope used for this motor format, while standard dynamic balancing supports smooth running during continuous operation. A standard cast housing is also used, so the unit can be mounted without any special surface treatment requirements.