Product Description:

The MDD093C-N-020-N2L-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for digital drive controllers, this motor converts controlled current from the converter into precise shaft rotation for indexing tables, packaging stations, and material-handling axes in automated lines. Its electromechanical design supports high positional accuracy while maintaining the thermal and dynamic response needed for continuous industrial duty. The motor is suited to closed-loop motion tasks that require repeatable acceleration, steady torque delivery, and stable operation over long production runs.

At its nominal speed of 2000 rpm, the rotor is trimmed to standard balancing so vibration remains within acceptable limits during prolonged operation. Mounting accuracy is supported by the 130 mm centering diameter, which mates with correspondingly machined motor plates. Power and feedback leads exit on side B through a single-piece connector, which simplifies cable routing and helps reduce wiring errors. The motor is supplied without a blocking brake, so static holding torque must be provided by the drive or an external clamp. Position data are returned through digital servo feedback, enabling the controller to correct position and speed in real time. The standard housing provides normal heat dissipation without auxiliary cooling channels.

The mechanical interface uses a keyway shaft that transfers torque without relying on frictional clamping. A front-end construction rated 093 in the MDD frame matrix fixes the flange dimensions, while length code C marks the active stack used for continuous torque capacity. The motor has a single shaft end and no auxiliary shaft extension on the opposite face. Contaminant ingress at the output is minimized with a shaft seal, helping preserve grease life and maintain the motor's IP integrity during frequent washdown cleaning or airborne particle exposure. This shaft arrangement supports direct coupling to pulleys, gearboxes, or other driven machine elements.