Product Description:

The MDD093C-N-020-N2L-130GL1 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is an AC servo motor intended for use with compatible digital drive controllers, where it provides closed-loop torque and speed control for coordinated machine axes. In automated assembly lines and packaging systems, the motor converts drive commands into precise rotary motion for tooling, indexing units, and conveyor sections. That operating behavior is useful on equipment where multiple axes must move in step without losing position accuracy during repeated cycles.

The motor has a nominal speed of 2000 rpm, so it suits medium-speed servo applications that require continuous operation under rated conditions. For positional stability at standstill, the built-in brake provides 11 Nm of holding torque. A centering diameter of 130 mm helps align the flange with the machine interface and reduce mounting runout. Feedback is supplied by digital servo feedback, which sends position data to the controller for closed-loop regulation. This arrangement allows the drive to monitor motor position directly during acceleration, deceleration, and holding tasks. The motor uses a plain shaft, allowing torque transmission through friction-locking couplings or similar clamping elements rather than a keyed connection.

Cabling enters on the left side, which can simplify routing where neighboring axes leave limited clearance on one side of the machine. The power and signal leads terminate on a connector, making the motor easier to connect and disconnect during installation or service. Separate termination through the connector also helps keep wiring orderly in compact control spaces. Size code 093 indicates the frame class used for this motor, and a standard housing provides the usual enclosure arrangement for the series. The motor also uses a shaft seal, and its standard balancing grade helps maintain smooth running during normal servo operation.