Product Description:

The MDD093C-N-020-N2L-130GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current into tightly regulated torque and speed, allowing lathes, pick-and-place portals, and conveyor axes to follow programmed motion profiles. The unit integrates into Indramat’s modular drive platform so that a matched controller and motor can work together in coordinated motion systems. When paired with a compatible digital drive, the motor can respond quickly to changing load conditions while maintaining repeatable axis movement during positioning and speed control.

Nominal speed is 2000 rpm, which provides a stable operating point for closed-loop velocity control. Rotor centering is obtained through a 130 mm pilot diameter, which aligns the housing with machine mounts and helps reduce mounting offset. Power and feedback terminations exit on the left side through a keyed connector, which can simplify cable routing when adjacent machine components limit access. Position data flow is handled by digital servo feedback, providing high-resolution signals for precise synchronization with drive electronics. Standard dynamic balancing and a sealed housing support smooth operation and help protect internal parts from dust and other common contaminants found in industrial settings.

The motor is supplied without a blocking brake, so static holding torque during power-off must be provided by the drive or by an external brake system. A plain shaft in a standard single-ended layout, combined with a shaft seal, permits direct coupling to driven elements while helping protect the bearing area from lubricants and dust. Motor length code C increases active stack length for higher continuous torque, and frame size 093 keeps the housing compatible with established MDD mounting patterns. The omission of a side-B shaft end shortens the overall body and leaves the rear side closed, which can be useful where installation space is limited near guards, panels, or other machine structures.