Product Description:

The MDD093C-N-020-N2L-130GA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is installed on machine axes that require closed-loop velocity and position control, such as packaging stations, material-handling gantries, and CNC auxiliary drives. By converting controlled current from an electronic amplifier into torque, the unit supports coordinated, repeatable motion in multi-axis automation cells. This operating principle allows the motor to respond smoothly to changing speed and position commands during automated motion.

Its centering diameter is 130 mm, which serves as the mounting pilot that aligns the motor to its machine flange. The power and feedback conductors exit on Side A, helping keep cable routing organized inside the enclosure. A holding brake rated at 22 Nm is integrated, so the shaft can remain stationary when power is removed. Position verification is provided through digital servo feedback, giving the drive controller high-resolution commutation and stable loop control. During continuous operation, the rotor reaches a nominal speed of 2000 min⁻¹, which suits axes that favor higher torque at moderate rotational rates. Standard dynamic balancing minimizes vibration, and the sealed aluminum housing uses a circular connector interface for compact cable attachment.

The frame size code 093 corresponds to the stator outside diameter, while the extended active length of code C increases magnetic surface for greater continuous torque. A plain shaft transmits motion without keyways, and a shaft seal helps keep lubricants and debris away from the bearing chamber. The shaft end is supplied in the standard single-ended configuration, so the opposite side remains free of an auxiliary output. The locked power and feedback interface remains compatible with existing drive-side cable sets, which helps preserve consistent wiring layouts across similar axes.