Product Description:

Bosch Rexroth Indramat manufactures the MDD093C-N-020-N2L-130GA0 as part of the MDD Synchronous Motors series. This permanent-magnet servo motor interfaces directly with Indramat digital drive controllers, translating commanded current into precise torque and speed for automated pick-and-place units, printing lines, or gantry axes. Its role in industrial automation is to deliver repeatable rotary motion with integrated position feedback so PLC-controlled systems can execute cycles with minimal overshoot and settling time.

Mechanical fit uses a centering pilot of 130 mm, allowing rigid mounting to gearboxes or machine plates without shims. The active winding corresponds to motor size 093, while the stack depth identified by length code C provides a longer magnetic circuit for higher continuous torque than shorter variants. During operation, the rotor reaches a nominal speed of 2000 rpm, a value matched to Indramat drive parameters for stable 1:1 velocity control. Connection hardware is simplified by a keyed power and feedback connector that exits on side A of the housing, which keeps cabling on the same face when multiple axes share a frame. Position data are provided by digital servo feedback, enabling the drive to compute instantaneous angle without external transducers.

This model uses a plain shaft, which accepts clamp couplings or shrink disks without keyway stress concentrations. A radial shaft seal protects the internal bearings when oil mist or coolant is present. Because the motor is supplied without a blocking brake, holding torque during power-off must be provided by the drive or by an external clamp if vertical loads are involved. Standard dynamic balancing minimizes vibration, and the housing uses the MDD family cooling surface so it can be mounted in any orientation inside an IP54 cabinet.