Product Description:

The MDD093C-N-020-N2L-110PL2 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into controlled rotary motion for positioning, indexing, and speed-regulated operation in conveyors, pick-and-place units, and packaging equipment. The motor uses a permanent-magnet rotor with electronic commutation to deliver repeatable torque response and quick acceleration during cyclic machine movement. Its design suits automated axes that require stable motion during frequent starts, stops, and direction changes.

The motor has a nominal speed of 2000 rpm, which gives the axis a stable continuous operating speed for geared or direct-coupled layouts. A blocking brake rated at 22 Nm supplies holding torque when vertical or suspended loads must remain in place during power loss or stop conditions. Position information is returned through digital servo feedback (DSF), allowing the connected drive to regulate speed and position with closed-loop control. Both power and feedback connections exit on the left side, and the centering pilot diameter of 110 mm helps seat the motor accurately on matching flanges.

The output shaft uses a keyway so torque can be transferred securely to couplings, pulleys, or gear inputs. Electrical termination is provided through a vibration-resistant connector, which helps maintain a secure interface where machine motion or cabinet vibration is present. The stator uses length code C, adding active iron to support higher continuous output within this housing style. Frame size 093 gives the motor the matching mounting footprint for that body size. The unit also has a shaft seal, standard balancing, and a single shaft end, which support smooth rotation and reliable coupling in enclosed machine assemblies.