Product Description:

The MDD093C-N-020-N2L-110PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for connection to digital drive controllers, it converts commanded current into proportional torque so that indexing tables, pick-and-place arms, and other motion axes achieve repeatable positioning in automated cells. The integrated brake, feedback system, and sealed shaft reduce the number of separate external components needed around the motor. This arrangement supports compact machine layouts where reliable closed-loop motion is required across repeated production cycles.

Its nominal speed is 2000 rpm, which is the maximum continuous rotational rate under rated voltage and load. The blocking brake generates 11 Nm of static torque, allowing the shaft to hold position during power-off or emergency stops. Position data is transmitted through digital servo feedback (DSF), giving the controller rotor position for closed-loop velocity and position control. Accurate mechanical registration is assisted by a centering pilot of 110 mm, which helps align the motor with coupled machinery and reduce radial runout. Power and feedback leads exit on side A, so cable routing can follow one direction when the unit is mounted beside adjacent axes.

The motor length code C gives the unit a longer stator stack, which increases thermal capacity within this frame size. The output uses a keyway shaft for positive torque transmission, and it includes a shaft seal to help keep coolant splash and airborne particles away from the front bearing. A single industrial connector carries both power and feedback conductors, which reduces the number of separate cable entry points at the motor. The housing supports steady operation during continuous-duty cycles by helping keep vibration low and force delivery consistent.