Product Description:

The MDD093C-L-030-N2M-130PR0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it delivers commanded torque and speed to automated axes used in material handling, packaging, and metal-cutting equipment. The 093 frame combines a laminated stator with rare-earth magnets so that the drive can achieve precise motion profiles while maintaining compact dimensions inside a machine cabinet.

Mechanical alignment is handled by a centering diameter of 130 mm, while standard rotor balancing keeps residual vibration within ISO limits. The unit carries length code C within the 093 frame, giving additional active stack height for higher torque density. Motor cabling exits on the right side so wiring runs do not interfere with adjacent hardware, and the power and feedback lines plug into a single connector. Feedback is provided by Digital servo feedback (DSF), allowing the controller to close position loops accurately at the rated speed of 3000 rpm. A housing prepared for surface cooling lets external air movers or cold plates draw heat away without enlarging the stator, sustaining continuous output in confined enclosures.

Position data remains valid through power cycles because an integrated multiturn absolute encoder stores shaft revolution counts. The rotor is machined with a keyway so couplings can transmit peak torque without slip, and a factory-fitted shaft seal helps keep lubricants in place and airborne particles out of the bearing chamber during washdown or dust-laden operation. For applications that rely on regenerative braking from the drive, the motor is supplied without a blocking brake, decreasing inertial load. A single-ended shaft on side A streamlines the mounting of pulleys or gearheads when the opposite end is not required.