Product Description:

The MDD093C-L-030-N2M-130PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for direct connection to digital drive controllers, where it converts regulated current into controlled torque and speed for positioning, indexing, and packaging axes. Its frame size 093 and length code C place it in the medium-power range of the product line while keeping a mounting pattern that suits surface-cooled machine frames. This layout makes the motor suitable for automated equipment that requires accurate motion and compact installation.

Its mounting interface uses a centering diameter of 130 mm, which supports accurate alignment with gearbox flanges and machine faces. Power and feedback leads exit on the left side through a keyed connector, helping keep cable routing orderly in compact cabinets. A blocking brake rated at 22 Nm locks the rotor during idle periods or power-off conditions. The housing is prepared for surface cooling, so external airflow across the mounting surface can remove thermal losses. A shaft seal helps limit dust and coolant entry, and the shaft end follows the standard profile without a secondary extension.

Dynamic performance is based on a nominal speed of 3000 rpm, matched to digital current loops that use Digital servo feedback (DSF) for precise position control. The built-in integrated multi-turn absolute encoder returns absolute position data over multiple revolutions, so the axis can retain position information after power cycles. Torque is transmitted through a keyway, which helps the coupling resist slip during rapid reversals and repeated indexing moves. Standard rotor balancing supports smooth operation, and the single-ended shaft arrangement helps keep overall motor depth lower when the unit is mounted against fan-cooled machine panels.