MDD093C-L-030-N2M-130PL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
58 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130PL1 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It features a nominal speed of 3000 rpm, a 130 mm centering diameter, and an integrated multiturn absolute encoder. The motor has a surface cooling housing, a shaft with keyway and seal, and includes an 11 Nm blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-130PL1 synchronous motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it supplies closed-loop torque and speed control for axes in industrial automation, including packaging machinery and transfer lines. The motor couples directly to a servo amplifier and converts electrical commands into rotary motion for mid-frame applications. It is well suited to synchronized axes that must start, stop, and reverse direction without losing positional consistency.
This model uses standard rotor balancing to limit vibration at rated speed. The centering pilot measures 130 mm, which aligns the housing to mounting faces for accurate installation. Power and feedback connectors exit on the left side, which can simplify cable routing when the motor is mounted close to the machine frame. Position data are delivered by an integrated multi-turn absolute encoder, so the drive can retain shaft position over multiple revolutions without a homing move. A blocking brake rated at 11 Nm holds the load when power is removed, helping prevent drift on vertical axes. Heat is removed through surface cooling, allowing continuous duty without an external blower. The motor has no side-B shaft extension, and connections are made through a single molded industrial connector.
In operation, the drive receives rotor feedback through digital servo feedback (DSF), supporting stable closed-loop current and speed control. Its nominal speed of 3000 rpm suits production lines that require quick indexing with controlled stopping behavior. The output shaft has a keyway, so torque can be transferred securely to gears, pulleys, or couplings, and an integral shaft seal helps keep coolant away from the front bearing. The frame corresponds to size 093 with motor length code C, which gives the motor a longer magnetic stack while keeping overall mass moderate. The housing remains suitable for installations where axis responsiveness and compact machine spacing are both important.
Frequently Asked Questions about MDD093C-L-030-N2M-130PL1:
Q: What is the connection direction and type for the MDD093C-L-030-N2M-130PL1 motor?
A: The MDD093C-L-030-N2M-130PL1 has a left-facing connector for electrical connection.
Q: What type of encoder is included with the MDD093C-L-030-N2M-130PL1?
A: This model features an integrated multiturn absolute encoder which tracks positions over multiple revolutions.
Q: Does the MDD093C-L-030-N2M-130PL1 include a holding brake and what is its torque?
A: The MDD093C-L-030-N2M-130PL1 comes with a blocking brake that delivers 11 Nm of holding torque.
Q: What kind of housing does the MDD093C-L-030-N2M-130PL1 motor use for cooling?
A: This motor is built with surface cooling housing to support effective thermal management.
Q: What is the centering diameter of the MDD093C-L-030-N2M-130PL1 motor?
A: The centering diameter of the MDD093C-L-030-N2M-130PL1 is 130 mm, which helps in mounting alignment.
