MDD093C-L-030-N2M-130PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
33 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130PL0 is a synchronous motor in the MDD Synchronous Motors series, designed for digital drive controllers. It features a 130 mm centering diameter, operates at a nominal speed of 3000 min⁻¹, and uses a standard shaft with a keyway and shaft seal. The motor includes an integrated multiturn absolute encoder and provides digital servo feedback, with a connector for left-side connection and surface cooling housing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-130PL0 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat for use with digital drive controllers in the MDD Synchronous Motors series. It converts controlled electrical input into rotary motion for positioning axes and speed-regulated machine functions in automated equipment. Its classification as a motor for digital drive controllers means it is intended to operate from compatible inverter modules rather than from direct mains power. This arrangement allows the drive to manage current, speed, and position as a coordinated servo system.
The motor has a nominal speed of 3000 rpm, which represents its rated operating shaft speed under normal conditions. A centering diameter of 130 mm helps align the housing with compatible machine interfaces during installation. The output shaft uses a keyway, allowing torque transfer through standard keyed couplings. Feedback is handled through digital servo feedback (DSF), so the drive receives the position information needed for closed-loop motion control. The motor is supplied without a blocking brake, so any holding function at standstill must come from the drive or an external mechanical device.
Position tracking is supported by an internal integrated multi-turn absolute encoder, which allows the drive to retain shaft position information over multiple revolutions. Heat is removed through a housing prepared for surface cooling, allowing thermal energy to pass into a mounting surface or external cooling structure. Power and feedback cables exit through a sealed connector arranged on the left side of the flange, which can help where cabinet space is limited on one side of the machine. The motor also has frame size 093, a C length housing, a shaft seal to reduce the entry of dust or fluids, and a standard primary shaft end without a side-B extension.
Frequently Asked Questions about MDD093C-L-030-N2M-130PL0:
Q: What kind of shaft and seal does the MDD093C-L-030-N2M-130PL0 motor use?
A: The MDD093C-L-030-N2M-130PL0 motor features a standard keyway shaft with a shaft seal for enhanced protection.
Q: What type of encoder is integrated in the MDD093C-L-030-N2M-130PL0 motor?
A: This model is equipped with an integrated multiturn absolute encoder for precise motion control.
Q: Does the MDD093C-L-030-N2M-130PL0 motor include a holding brake?
A: The MDD093C-L-030-N2M-130PL0 is manufactured without a holding brake.
Q: What housing cooling method is used in the MDD093C-L-030-N2M-130PL0 motor?
A: This motor is designed for surface cooling, which helps dissipate heat during operation.
Q: What is the direction and type of electrical connection on the MDD093C-L-030-N2M-130PL0 motor?
A: The connection for this motor is a left-facing connector for electrical integration.
