MDD093C-L-030-N2M-130PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
58 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130PB0 is a synchronous motor from the MDD Synchronous Motors series, featuring a nominal speed of 3000 rpm and a centering diameter of 130 mm. It is designed for surface cooling, uses a connector on Side B, and includes an integrated multiturn absolute encoder with digital servo feedback. The motor comes without a blocking brake and has a standard shaft with keyway and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into controlled torque and speed for axes found in gantry pick-and-place modules, packaging stations, and material-handling arms within industrial automation. Its synchronous design supports precise acceleration, stable speed regulation, and repeatable positioning during continuous machine cycles. This type of motor is suited to closed-loop motion applications that require consistent response during repeated production tasks.
A centering diameter of 130 mm seats the stator housing to machine frames with low runout. Power and feedback conductors exit on Side B, so cable routing follows that fixed orientation. The motor uses a single plug-in connector interface, which simplifies installation and helps reduce wiring errors. Under rated excitation it reaches a nominal speed of 3000 rpm, giving a broad operating range for high-speed servo tasks. Frame code 093 identifies the motor size used for medium-duty axes. Standard dynamic balancing reduces vibration during high-cycle operation, and the keyed shaft is supplied without a second shaft end.
Position data is delivered by an integrated multi-turn absolute encoder, allowing the controller to recover rotor angle after power loss. The motor is supplied without a blocking brake, so a separate holding method is needed when the load must remain stationary with power removed. Its housing is prepared for surface cooling, enabling external cooling surfaces to remove heat from the motor body. Real-time commutation signals are exchanged through digital servo feedback, supporting responsive control and repeatable positioning. A shaft seal limits ingress, and motor length code C indicates an extended stack length.
Frequently Asked Questions about MDD093C-L-030-N2M-130PB0:
Q: What type of encoder is included with the MDD093C-L-030-N2M-130PB0 motor?
A: The MDD093C-L-030-N2M-130PB0 features an integrated multiturn absolute encoder for precise position tracking.
Q: Does the MDD093C-L-030-N2M-130PB0 include a holding brake?
A: This model operates without a blocking brake, so a holding brake is not provided.
Q: What is the nominal speed of the MDD093C-L-030-N2M-130PB0?
A: The nominal speed for this motor is 3000 min⁻¹, suitable for many industrial drive tasks.
Q: How is the MDD093C-L-030-N2M-130PB0 motor cooled?
A: The MDD093C-L-030-N2M-130PB0 uses surface cooling via its housing design for thermal management.
Q: What type of shaft and sealing does the MDD093C-L-030-N2M-130PB0 utilize?
A: The motor features a keyway shaft with a shaft seal for secure and protected mechanical coupling.
