MDD093C-L-030-N2M-130PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911257794
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
32 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130PA2 is a synchronous motor from the MDD Synchronous Motors series, featuring a nominal speed of 3000 min⁻¹ and a motor size of 093. It has a centering diameter of 130 mm and comes with surface cooling housing and a standard shaft with keyway and shaft seal. The motor includes a blocking brake with 22 Nm holding torque and an integrated multiturn absolute encoder with digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-130PA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and is part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts electrical power into controlled mechanical rotation for positioning axes, material-handling modules, and other precision automation tasks. Its mechanical dimensions, electrical interfaces, and built-in position sensing suit modular machine frames where fast installation and repeatable accuracy are required.
A nominal speed of 3000 rpm is the upper continuous operating velocity that can be sustained without thermal derating. During installation, the centering pilot of 130 mm helps align the flange concentrically with the driven load and reduces radial misalignment forces. The integrated blocking brake supplies 22 Nm of holding torque, so vertical or out-of-balance axes remain locked when power is removed. A shaft machined with a keyway transfers torque through standard keyed couplings and helps prevent slippage under acceleration. The housing is configured for surface cooling, so heat must be removed through external airflow or mounting plates rather than natural convection.
Position feedback is produced by an integrated multi-turn absolute encoder, which reports rotor angle and revolution count to the drive. The signal is formatted as Digital servo feedback (DSF), providing high-resolution data for tight velocity and position loops. All power and feedback cables terminate on a plug-in connector, which simplifies cable connection during installation. A shaft seal helps protect the bearing set against coolant spray or dust, while standard dynamic balancing limits vibration during operation. The motor uses a C length code and a 093 frame size, giving it a moderate footprint for surface-cooled applications.
Frequently Asked Questions about MDD093C-L-030-N2M-130PA2:
Q: What type of encoder does the MDD093C-L-030-N2M-130PA2 motor use?
A: The MDD093C-L-030-N2M-130PA2 is equipped with an integrated multiturn absolute encoder for accurate position feedback.
Q: Does the MDD093C-L-030-N2M-130PA2 motor have a holding brake and what is its torque?
A: This model includes a blocking brake with a holding torque of 22 Nm for secure positioning.
Q: What type of shaft does the MDD093C-L-030-N2M-130PA2 motor feature?
A: The MDD093C-L-030-N2M-130PA2 motor uses a keyway shaft with a shaft seal for reliable mechanical coupling and protection.
Q: What type of cooling does the MDD093C-L-030-N2M-130PA2 motor utilize?
A: This motor is designed for surface cooling to help manage its operating temperature.
Q: What is the centering diameter of the MDD093C-L-030-N2M-130PA2 motor?
A: The centering diameter of this model is 130 mm, aiding in precise alignment during installation.
