MDD093C-L-030-N2M-130PA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
35 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-130PA0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a nominal speed of 3000 rpm and includes a keyway shaft with a shaft seal. The motor comes with an integrated multiturn absolute encoder, supports digital servo feedback, and has surface cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-130PA0 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers commanded torque and speed for coordinated axes in industrial automation. The 093 frame paired with length code C provides a practical balance of torque density and installation depth, making the unit a common choice for packaging, converting, and assembly machinery. Standard balancing keeps residual vibration low and helps protect couplings, bearings, and other connected machine elements during high-speed operation.
Its nominal operating speed is 3000 rpm, so the rotor can sustain that velocity under rated electrical and thermal conditions. The flange has a centering diameter of 130 mm, and this machined register aligns the housing precisely to the machine interface for accurate concentricity. Position feedback is supplied through digital servo feedback (DSF), which sends high-resolution incremental and commutation data to the drive for closed-loop control during acceleration and positioning. The shaft uses a keyway for coupling to compatible hubs, and the power and signal conductors terminate in a field-replaceable connector that supports straightforward cable attachment. A shaft seal is also installed at the output end to help protect the bearing area from splash exposure.
For thermal management, the housing is configured for surface cooling, so mounting the motor against a cooled machine surface can remove stator losses without auxiliary fans. The motor is supplied without a blocking brake, so any holding function for vertical or suspended loads must be provided externally. An integrated multi-turn absolute encoder retains position information across power cycles, which reduces the need for repeated homing after startup. Cable entry is oriented on Side A, which can simplify routing when the motor is installed near other drive components. The standard shaft end has no rear extension, and the shaft seal helps resist splash entry at the coupling interface.
Frequently Asked Questions about MDD093C-L-030-N2M-130PA0:
Q: What type of encoder is included with the MDD093C-L-030-N2M-130PA0 motor?
A: The MDD093C-L-030-N2M-130PA0 features an integrated multiturn absolute encoder for precise position tracking.
Q: What kind of shaft and sealing does the MDD093C-L-030-N2M-130PA0 motor use?
A: This motor is equipped with a shaft featuring a keyway and a shaft seal for secure coupling and additional protection.
Q: What is the nominal speed of the MDD093C-L-030-N2M-130PA0?
A: The MDD093C-L-030-N2M-130PA0 operates with a nominal speed of 3000 min⁻¹.
Q: How is the MDD093C-L-030-N2M-130PA0 motor cooled?
A: The housing of this model is designed for surface cooling to help dissipate heat during operation.
Q: Is a holding brake included with the MDD093C-L-030-N2M-130PA0 motor?
A: This unit does not include a blocking brake, allowing free movement when not powered.
