Product Description:

The MDD093C-L-030-N2M-130GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series and intended for direct connection to digital drive controllers in industrial automation. It delivers closed-loop motion by converting commanded current into precise rotary movement for axes that require repeatable positioning, stable speed control, and quick direction changes. An integrated multiturn absolute encoder inside the housing reports actual shaft position to the drive, which supports coordinated motion in packaging equipment, pick-and-place systems, and CNC feed applications. The motor is built for applications that need accurate feedback and consistent response during changing load conditions.

A centering diameter of 130 mm aligns the flange accurately with machine mounting surfaces, while housing length code C indicates a longer active stack within the 093 frame. The output uses a plain shaft, which provides a smooth cylindrical surface for couplings, and it is fitted with a shaft seal to help limit contaminant ingress at the shaft opening. The motor is supplied without a blocking brake, so any load that must remain fixed after power removal requires external holding force or drive-generated torque. These features make the unit suitable for installations where direct coupling, clean shaft sealing, and controlled stopping behavior are required.

Electrical connections are arranged on side B of the housing and use a modular connector interface for power and feedback wiring. Under rated load, the motor reaches a nominal speed of 3000 rpm, allowing short cycle times in dynamic automation tasks. Position signals are returned through digital servo feedback (DSF), which gives the controller accurate rotor data for closed-loop regulation. The aluminum housing is arranged for surface cooling, so surrounding airflow can carry away heat during operation and support stable thermal behavior over extended duty cycles.