Product Description:

The MDD093C-L-030-N2M-130GA1 is a synchronous servo motor in the MDD Synchronous Motors series from Bosch Rexroth Indramat. Engineered for use with digital drive controllers, it converts regulated current into precise rotary motion for positioning axes, conveying systems, and spindle-related tasks in automated equipment. When paired with a compatible controller, the motor supports closed-loop operation that helps maintain stable speed and accurate position under changing load conditions. Its synchronous design also supports repeatable motion in machines that run for long production cycles.

The motor has a rated speed of 3000 rpm, allowing it to operate at a common industrial servo speed for fast axis movement. A blocking brake with a holding capacity of 11 Nm secures the shaft during power loss, and brake release is controlled through the drive. The housing is prepared for surface cooling, so heat can be removed through the motor body without adding a separate fan assembly. Position feedback is provided by an integrated multi-turn absolute encoder, which lets the drive retain absolute position information over multiple revolutions after restart. Power and signal connectors are located on side A, which helps keep cable routing orderly in compact machine layouts.

A centering pilot of 130 mm aligns the flange accurately with the machine interface, and standard balancing helps reduce vibration during operation. Position data is transferred through digital servo feedback (DSF), supporting high-resolution closed-loop control with compatible drives. The motor uses a plain shaft with a shaft seal to transmit torque while helping resist splash entry and limit lubricant loss. This version uses the C motor length and the 093 frame size, which identify the housing dimensions for the mechanical envelope. The electrical interface uses connectors rather than fixed leads, which supports clean installation inside enclosed machine assemblies.