Product Description:

The MDD093C-L-030-N2M-110PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for use with digital drive controllers that regulate torque, speed, and position in automated machinery. In assembly lines, packaging stations, and handling modules, the motor converts electrical commands into controlled rotary motion for axes that must start, stop, and reverse with good repeatability. The size 093 platform with length code C gives it a compact footprint, while standard rotor balancing helps maintain smooth rotation across the motor's operating range.

The motor uses a centering diameter of 110 mm for accurate seating in precision-machined mounting flanges. Power and feedback cables exit on the right side, which can simplify routing when multiple drives are installed next to one another, and the sealed connector arrangement maintains IP protection after mating. The output shaft uses a keyway so couplings or pulleys can transmit torque without slip. It is supplied with a shaft seal to help retain lubricant and reduce contaminant entry around the shaft opening. The housing is arranged for surface cooling, so heat can be removed through the motor exterior by external airflow or a cooling plate instead of an internal fan.

During operation, the motor reaches a nominal speed of 3000 rpm, which suits fast-cycle automation tasks that need quick response from the axis. Position information is provided by an integrated multi-turn absolute encoder, and the control loop is closed through digital servo feedback (DSF) so the drive can track commanded motion accurately over repeated cycles. When the axis is stopped, the blocking brake supplies 22 Nm of holding torque to secure vertical or overhung loads until motion resumes. The brake helps prevent unwanted shaft movement during stops or power-off conditions.