Product Description:

The MDD093C-L-030-N2M-110PR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical input from the drive into controlled mechanical rotation for automated machinery. Standard balancing helps limit vibration during operation, and a shaft seal helps retain lubricant at the shaft opening. A standard shaft end without a side-B extension simplifies coupling to driven equipment, and electrical power and feedback exit through a right-side connector interface that supports compact cable routing.

The motor reaches a nominal speed of 3000 rpm, allowing fast point-to-point motion when it is paired with a compatible drive. Position information is returned through digital servo feedback (DSF), and the feedback system uses an integrated multiturn absolute encoder so position remains available after a power cycle. The centering pilot measures 110 mm in diameter, which helps maintain coaxial alignment during face mounting. Motor length code C gives the unit an extended active stack for higher torque density than shorter versions in the same frame. Torque is transferred through a shaft with a keyway, allowing use with standard keyed couplings.

A blocking brake is fitted and provides 11 Nm of holding torque, which helps keep the rotor stationary when power is removed. The housing is arranged for surface cooling, so heat is carried away through the mounting surfaces rather than by an internal fan. The motor uses motor size 093, which places it within the corresponding frame dimensions of this product line. This combination of brake and cooling arrangement suits installations where mounting space is limited and stable thermal contact with the machine structure is available.