Product Description:

The MDD093C-L-030-N2M-110PL2 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated electrical power from a compatible drive into rotary motion for precise positioning, speed, and torque tasks on automated machinery. Its size code 093 and length code C place it in the mid-range of the series, giving machine builders a balance between compact footprint and continuous torque delivery for indexing tables, packaging axes, and material-handling gantries.

Rated for a nominal speed of 3000 rpm, the rotor can track reference commands without field weakening across typical 50/60 Hz inverter outputs. A centering diameter of 110 mm aligns the flange to gearbox or machine side walls, helping maintain concentricity at high speed. Power and feedback connectors exit the stator on the left side, simplifying cable routing in cabinets mounted to the drive side of the machine. The motor uses a single-plug connector interface, which supports quick exchange during service. Heat is removed through a ribbed housing designed for surface cooling, allowing continuous operation without auxiliary fans.

Position information is provided by an integrated multi-turn absolute encoder that streams data as digital servo feedback (DSF), enabling the controller to close the loop without external transducers. A blocking brake rated at 22 Nm secures vertical loads when power is removed, while a standard balancing grade limits residual vibration for smooth motion at full speed. The motor uses a keyway shaft protected by a fitted shaft seal, which transmits torque to couplings and resists oil ingress from adjacent gearboxes. The absence of a side-B shaft end reduces overhung mass and helps keep dynamic response consistent with the motor’s length and inertia profile.