Product Description:

The MDD093C-L-030-N2M-110PA2 is a size 093 synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive output current into rotary motion for positioning, velocity, or torque control tasks on automated machinery. The design includes an internal rotor, stator windings, and feedback devices that support closed-loop performance in packaging lines, material-handling axes, and machining centers.

The motor reaches a nominal speed of 3000 rpm, allowing it to match typical inverter outputs while still providing dynamic reserve for acceleration. Motion can be held when power is removed because a blocking brake rated at 22 Nm is integrated. Heat generated in the windings is removed through a housing prepared for surface cooling, so continuous operation is possible when the motor is mounted on a cooled machine frame. Position and velocity are reported by a digital servo feedback (DSF) system that includes an integrated multiturn absolute encoder, giving the controller absolute rotor angle after power-up and eliminating homing moves. Standard dynamic balancing, a connector-style power and feedback interface, and single-ended shaft construction complete the operating package.

A centering diameter of 110 mm provides the pilot fit on the mounting flange when the C-length frame is installed. All electrical and feedback conductors exit on Side A through a keyed circular connector, which helps simplify cable routing. Torque is transmitted through a shaft with a keyway, and a fitted shaft seal helps limit lubricant escape and contaminant entry at the coupling interface. Standard balancing keeps vibration within ISO limits, and the lack of a secondary shaft end supports compact installation in single-ended drive trains.