Product Description:

The MDD093C-L-030-N2M-110GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies closed-loop torque and speed for axes that demand precise positioning and rapid cycling in automated machinery. Its frame designation 093 and length code C place it in the mid-range of the series, offering a balance between compact dimensions and continuous power output.

Its mechanical interface begins with a centering diameter of 110 mm, which provides the reference pilot for flange alignment inside a machine frame. Power and feedback cabling exit on the right side, so cabinet layouts can be planned without crossing conductors over the motor housing. Under rated conditions, the rotor reaches 3000 rpm, allowing direct coupling to transmissions on packaging or handling lines. The housing is prepared for surface cooling, meaning mounting surfaces conduct heat away rather than relying on an internal fan. A plain shaft with no keyway minimizes concentricity errors when clamp couplings are used. The connection type is a sealed circular connector that permits exchange when servicing the unit.

Position and diagnostics are handled by the integrated multi-turn absolute encoder, enabling the drive to count revolutions even after power loss. Feedback signals are transmitted as digital servo feedback (DSF), so only one hybrid cable is required between the motor and controller. The drive train is protected by a shaft interface that is supplied with a shaft seal, which helps block lubricant migration in horizontal or vertical mounts. For applications that decelerate safely through drive torque alone, the unit is delivered without a blocking brake, reducing inertia and brake wear. The motor length code C indicates the active stack height, and the standard shaft end omits a side B extension to conserve space.