MDD093C-L-030-N2M-110GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
25 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2M-110GL0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a plain shaft with a shaft seal, a centering diameter of 110 mm, and an integrated multiturn absolute encoder. The motor is designed for surface cooling and has digital servo feedback, with a nominal speed of 3000 min⁻¹.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2M-110GL0 is manufactured by Bosch Rexroth Indramat and is part of the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers and is installed wherever closed-loop servo axes require accurate velocity and position control on automated production lines, packaging machinery, or handling systems. Its synchronous design supports precise motion control during repeated starts, stops, and speed changes in automated equipment.
This model uses a centering diameter of 110 mm, allowing the flange to seat precisely against machine faces and maintain stable alignment during operation. With a nominal operating speed of 3000 rpm, it can match drive outputs that switch between rapid traverse and feed rates without losing synchronization. Wiring leaves the housing on the left side, so cable routing can follow the same machine edge and help keep the installation path organized. Position data is generated by an integrated multi-turn absolute encoder, letting the drive recover axis position after power interruptions without an external homing routine. Mechanical power is transferred through a plain shaft, which avoids keyway stress concentrations while still accepting shrink-fit couplings.
The housing is configured for surface cooling, so heat is removed through the mounted machine structure rather than by a separate fan. A shaft seal limits lubricant migration, and the motor is supplied without a blocking brake, so any holding duty must be handled by the drive or by external clamps. Rotor angle is returned through digital servo feedback, which matches the interface used by compatible Rexroth drive controllers. Electrical power and feedback cores terminate on a single connector, reducing the number of housing penetrations and simplifying cable entry. The motor uses length code C, size 093, and a standard shaft end without a side-B extension, which keeps the housing compact for closely spaced axis layouts.
Frequently Asked Questions about MDD093C-L-030-N2M-110GL0:
Q: What type of encoder does the MDD093C-L-030-N2M-110GL0 motor include?
A: This motor is equipped with an integrated multiturn absolute encoder for precise position feedback.
Q: What is the shaft configuration of the MDD093C-L-030-N2M-110GL0 motor?
A: The MDD093C-L-030-N2M-110GL0 features a plain shaft and does not include a side B shaft end.
Q: What type of cooling is used on the MDD093C-L-030-N2M-110GL0 motor?
A: The housing of the MDD093C-L-030-N2M-110GL0 is designed for surface cooling.
Q: What is the electrical connection direction and type of the MDD093C-L-030-N2M-110GL0?
A: The connection on this model is a connector, oriented to the left.
Q: Does the MDD093C-L-030-N2M-110GL0 include a holding brake?
A: This motor does not feature a holding brake as part of its configuration.
