Product Description:

The MDD093C-L-030-N2M-110GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers in automated machinery, it converts commanded electrical torque into mechanical rotation for positioning and velocity control tasks on production lines. Size code 093 and length code C indicate active core dimensions that suit medium-frame axes in packaging, printing, and material-handling equipment. The motor is intended for applications that require accurate speed regulation and repeatable axis movement during continuous operation.

The mechanical interface centers on a 110 mm pilot diameter, which aligns the flange precisely with gearboxes or mounting plates. Nominal output speed is 3000 rpm, so the motor matches drive inverters that supply the correct electrical frequency for its pole configuration. Power and feedback wiring exit on Side B, which can simplify routing when the motor back faces the cable track. An integrated multi-turn absolute encoder reports position and stores revolution data after power is removed, which reduces the need for homing at startup. The aluminum housing is machined for surface cooling, allowing continuous heat transfer into the machine structure when mounted to a suitable surface.

Complementing the encoder, the controller reads digital servo feedback, which supports precise current and velocity regulation at low speed. Rotor mass is factory balanced to the standard grade, so additional field balancing is usually unnecessary in typical belt-driven systems. A plain shaft transmits torque directly to couplings, and a built-in shaft seal helps keep lubricant and contaminants away from internal components. The motor comes without a blocking brake, so static holding must be provided by external means. It uses a single rear connector because the shaft end on side B is omitted, which helps keep the overall length compact.