Product Description:

The MDD093C-L-030-N2L-130PR1 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded electrical power into controlled mechanical rotation for positioning and speed-control tasks in automated machinery. Its compact housing and standardized interfaces suit multi-axis equipment such as packaging lines, pick-and-place gantries, and other motion-intensive systems. This arrangement supports repeatable motion where accurate starts, stops, and speed changes are required.

At a nominal speed of 3000 rpm, the rotor provides continuous motion that follows the drive output. The centering flange measures 130 mm, which helps maintain accurate alignment with the machine frame and reduces radial runout. Power and feedback leads exit on the right side, which can simplify cable routing in confined installations. Electrical connections are made through a sealed connector, so the housing does not need to be opened for normal wiring. For holding at standstill or during power loss, the integrated blocking brake provides 11 Nm of torque.

The housing has ribs for surface cooling, so heat is dissipated by convection along the exterior without auxiliary blowers. Rotor position is monitored through digital servo feedback, allowing the drive controller to maintain precise closed-loop regulation. This feedback path supports stable velocity control and accurate positioning during changing load conditions. The motor has size 093, and the C length code gives it a longer active stack for greater continuous power than shorter versions in the same frame. A standard shaft with a keyway provides positive torque transfer to couplings or pulleys, while the installed shaft seal helps block lubricant migration and airborne contaminants. Standard dynamic balancing limits vibration, and the lack of a side-B shaft end keeps the overall envelope short for flush mounting inside protective enclosures.