MDD093C-L-030-N2L-130PR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
56 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130PR0 is a motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It features a 130 mm centering diameter, a nominal speed of 3000 rpm, and a keyway shaft with a shaft seal. The motor uses digital servo feedback and is intended for surface cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-130PR0 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a motor for digital drive controllers intended to deliver commanded torque and speed to automation axes that rely on closed-loop control. By matching the electrical characteristics of the drive and reporting position through internal sensors, the unit helps coordinate multi-axis machinery without mechanical gearing. This arrangement supports precise motion in packaging, handling, and general industrial systems where repeatable positioning is required.
The motor’s centering pilot diameter is 130 mm, allowing precise seating against a gearbox or mounting flange so radial runout is minimized. Under rated excitation it reaches a nominal velocity of 3000 rpm, which is the synchronous operating point used when sizing the driven mechanics. The housing is designed for surface cooling, so heat is removed through surrounding air or machine-mounted conductive paths rather than an internal blower. Length designation C indicates the active stack height within this frame, and frame code 093 corresponds to the flange pattern, shaft geometry, and inertia class used for this motor size.
This model is supplied without a blocking brake, so static holding torque must come from the drive or external restraints during a power-off state. Power and feedback plugs are oriented to the right, which can simplify routing when the cabinet or cable track is on that side of the machine. The shaft bore protection system is equipped with a shaft seal to limit lubricant migration and particle ingress at the coupling interface. Rotor position and velocity are returned through digital servo feedback, providing multi-turn absolute information for real-time commutation and motion profiling without additional encoders. This feedback arrangement lets the controller monitor rotor position continuously during acceleration, steady motion, and deceleration.
Frequently Asked Questions about MDD093C-L-030-N2L-130PR0:
Q: What type of motor feedback is provided by the MDD093C-L-030-N2L-130PR0?
A: The MDD093C-L-030-N2L-130PR0 offers digital servo feedback (DSF) for precise motor positioning and control.
Q: What is the nominal speed rating for the MDD093C-L-030-N2L-130PR0 motor?
A: This model has a nominal speed of 3000 min⁻¹, allowing operation at high rotational velocities.
Q: What shaft and seal features does the MDD093C-L-030-N2L-130PR0 have?
A: A shaft with a keyway and a shaft seal is provided for secure mechanical connection and sealing.
Q: Does the MDD093C-L-030-N2L-130PR0 motor include a holding brake?
A: The MDD093C-L-030-N2L-130PR0 is manufactured without a blocking brake.
Q: How is the electrical connection configured on the MDD093C-L-030-N2L-130PR0?
A: This motor is designed for right-side electrical connection using a connector type interface.
