MDD093C-L-030-N2L-130PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
48 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130PL0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a nominal speed of 3000 rpm, a centering diameter of 130 mm, and a standard keyway shaft with shaft seal. The motor comes with digital servo feedback, supports surface cooling, and does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-130PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical output from the drive into regulated torque and speed for coordinated machine motion. This makes the motor suitable for positioning tables, gantries, processing spindles, and other automation axes that require repeatable response during acceleration, steady running, and stopping. When paired with a suitable controller, it can support precise interpolation and stable speed control across changing process loads.
Its nominal operating speed reaches 3000 rpm, giving the axis a high rotational speed for demanding motion tasks. A centering shoulder of 130 mm aligns the housing accurately to the mounting surface during installation. Cables exit on the left side, which can simplify routing when clearance on the right side is limited. A sealed connector carries both power and feedback conductors, so the motor can be disconnected without opening the housing. This arrangement keeps the electrical interface compact and supports service access in tightly packed machine frames. The unit is supplied without a blocking brake, so any load-holding function must be provided by an external device or by controlled drive torque.
The motor has size code 093, which places it within the corresponding frame range for compatible drive systems. Rotor position is monitored by digital servo feedback, supporting closed-loop control for accurate positioning and stable speed regulation. The housing is prepared for surface cooling, so heat can be removed through an external cooling plate or airflow path when the application requires higher continuous output. Torque is transmitted through a shaft machined with a keyway, and the shaft seal helps protect the bearings from dust or coolant. The C-length stator module, standard dynamic balancing, and the omission of a rear shaft end suit compact machine layouts that still need steady running at elevated speed.
Frequently Asked Questions about MDD093C-L-030-N2L-130PL0:
Q: What is the nominal speed of the MDD093C-L-030-N2L-130PL0 motor?
A: The MDD093C-L-030-N2L-130PL0 operates at a nominal speed of 3000 min⁻¹, providing steady performance within servo systems.
Q: What type of motor feedback does the MDD093C-L-030-N2L-130PL0 use?
A: This model features digital servo feedback (DSF), enabling precise position monitoring for closed-loop control.
Q: What shaft configuration and sealing does the MDD093C-L-030-N2L-130PL0 have?
A: A keyway shaft with a shaft seal is provided on this motor, supporting secure mechanical coupling and minimizing ingress of contaminants.
Q: How is the MDD093C-L-030-N2L-130PL0 motor cooled?
A: The housing of the MDD093C-L-030-N2L-130PL0 is built for surface cooling, allowing heat dissipation through the outer motor surface.
Q: Does the MDD093C-L-030-N2L-130PL0 include a holding brake?
A: This model is manufactured without a blocking brake, so it does not provide braking functionality during power-off conditions.
