Product Description:

The MDD093C-L-030-N2L-130PA2 is a brushless synchronous motor built by Bosch Rexroth Indramat and placed in the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts controlled electrical power into rotary motion for positioning tasks in automated machinery, assembly lines, and material-handling stations. It provides stable torque across a broad speed range and returns feedback for closed-loop control, which supports repeatable axis motion when loads change during operation. Because the motor is brushless, there are no wearing commutator parts in the electromagnetic conversion path, which helps maintain consistent performance in repeated production cycles.

At its rated operating point, the motor reaches a nominal speed of 3000 rpm, allowing direct coupling to gearless transmission stages that require high rotational velocity. Accurate mechanical alignment is supported by a 130 mm centering diameter on the flange, which helps the housing seat correctly on the machine face. Thermal energy is removed through a housing prepared for surface cooling, and the blocking brake supplies 22 Nm of holding torque when power is off. This cooling method transfers heat into an external cooling surface instead of relying on free-air convection around the motor body. Motion feedback is provided through Digital servo feedback (DSF), which gives the connected drive the position information needed for precise servo control.

Electrical and signal terminations use a compact connector mounted on Side A, which helps route cables along the machine frame without adding a separate terminal box. The output shaft uses a keyway and includes a shaft seal to limit lubricant escape and reduce particle ingress at the shaft opening. The sealed shaft arrangement supports use in enclosed machine sections where dust or light contamination can collect around couplings. A single shaft extension is provided on the drive side only, while the motor remains in frame size 093 within the MDD family. This arrangement keeps the opposite end closed and supports installations that use one driven coupling point.