MDD093C-L-030-N2L-130GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
4 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130GL2 is a motor from the MDD Synchronous Motors series designed for use with digital drive controllers. It features a nominal speed of 3000 min⁻¹ and comes with a digital servo feedback system. The motor includes a 22 Nm holding brake, left connector direction, and surface cooling housing with a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-130GL2 is a synchronous AC motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in industrial automation systems where closed-loop control of speed and torque is required for indexing tables, pick-and-place axes, and packaging stations. The motor works with a servo amplifier to convert three-phase electrical energy into precisely regulated mechanical rotation. Because the feedback loop is managed through the drive system, the motor is suitable for applications that require stable acceleration, controlled deceleration, and repeatable positioning under varying load conditions.
Mechanical fit is set by a centering diameter of 130 mm, which allows accurate seating against matching machine flanges. The rotor is balanced to a standard class to help reduce vibration during operation. The motor has size code 093, and the C length provides a deeper active stack for higher continuous power. Under rated conditions, the shaft reaches a nominal speed of 3000 rpm. A blocking brake is included, and its holding torque of 22 Nm keeps a vertical axis secured when power is off. Heat is removed through surface cooling, so the housing transfers thermal energy to the surrounding machine structure or external airflow. Position and velocity data are returned through digital servo feedback, allowing the drive to maintain accurate speed and position control.
Power and feedback leads connect through a connector, and the connection side is oriented to the left to simplify cable routing when the motor is mounted near a cabinet wall or on a gantry. This layout keeps the cable exit on one side of the housing and helps preserve clearance in compact machine sections. A shaft seal helps limit dust or coolant entry around the rotating member during normal operation. The output uses a plain shaft finished to standard tolerances, which allows direct coupling to gearboxes, timing pulleys, or rigid couplings. The motor has a single standard shaft end, so the opposite end remains closed.
Frequently Asked Questions about MDD093C-L-030-N2L-130GL2:
Q: Does the MDD093C-L-030-N2L-130GL2 motor include a holding brake, and what is its holding torque?
A: The MDD093C-L-030-N2L-130GL2 motor includes a blocking brake with a holding torque of 22 Nm.
Q: What type of motor feedback does the MDD093C-L-030-N2L-130GL2 support?
A: Digital servo feedback (DSF) is used for motor feedback in this model.
Q: What type of housing or cooling method is used in the MDD093C-L-030-N2L-130GL2 motor?
A: This model is designed for surface cooling, enhancing heat dissipation during operation.
Q: What is the nominal speed of the MDD093C-L-030-N2L-130GL2 motor?
A: The nominal speed of the MDD093C-L-030-N2L-130GL2 is 3000 min⁻¹.
Q: What type of shaft and sealing does the MDD093C-L-030-N2L-130GL2 motor have?
A: A plain shaft with shaft seal is featured on the MDD093C-L-030-N2L-130GL2 for secure coupling and dust protection.
