Product Description:

The MDD093C-L-030-N2L-130GL0 is a synchronous servo motor built by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary torque for precise axis positioning in automated machinery. The unit uses standard rotor balancing to minimize vibration during acceleration and steady operation. Its C-length housing provides rated output in a compact mechanical envelope that suits transfer systems, packaging equipment, and similar motion axes.

The motor mounts against a machine frame through a centering pilot of 130 mm, which helps maintain coaxial alignment with attached mechanics. Power and feedback cables exit on the left side through a keyed circular connector, which can simplify routing when the machine layout favors that direction. Its nominal operating point is 3000 rpm, supporting the speed range commonly used on positioning and handling axes. The housing uses surface cooling, so heat is transferred through the motor body and mounting interface rather than by a separate blower. Position and velocity data return to the controller through digital servo feedback, allowing closed-loop regulation and electronic commutation.

A plain shaft serves as the mechanical interface, and it is supplied with a shaft seal to help limit dust ingress and lubricant escape. The motor comes without a blocking brake, so any holding force at standstill must be provided by the drive or by external mechanical means. Its stator stack and winding layout correspond to the 093 size, which is suitable for mid-range load inertia and responsive motion. The shaft is present only on side A, which shortens the overall package and leaves the opposite end free of a secondary extension. The connection hardware uses a molded industrial connector for secure cable attachment.