MDD093C-L-030-N2L-130GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
59 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130GB2 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. The motor features a nominal speed of 3000 revolutions per minute and uses surface cooling. It includes a plain shaft with shaft seal and a holding brake rated at 22 Newton-meters of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-130GB2 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. Designed as a motor for digital drive controllers, it translates regulated three-phase output from an inverter into precise rotary motion required by automated packaging lines, gantry axes, and assembly stations. Integrated electronic commutation and internal position sensing allow the drive to close velocity and torque loops quickly, giving dependable and repeatable motion profiles for high-throughput equipment. Because the motor works closely with the drive controller during closed-loop operation, it can maintain stable torque delivery through frequent starts, stops, and direction changes.
This model reaches a nominal speed of 3000 rpm, enabling rapid indexing while remaining within the thermal limits supported by its surface cooling housing. Power and feedback are routed on side B, which can simplify cable runs when the motor is installed in deep cabinets, and the interface uses a standard industrial connector. A blocking brake is included, delivering 22 Nm of static holding torque so vertically oriented loads stay in position when power is removed. Dynamic control accuracy is secured by digital servo feedback, which streams high-resolution rotor position data to the drive and supports smooth low-speed operation during precise positioning tasks.
The mechanical envelope supports direct mounting through a centering pilot of 130 mm, and the unit follows size code 093 with a C length code. A positively engaged shaft seal protects the plain shaft against coolant and dust ingress, while the rotor is balanced to the standard grade to help reduce transmitted vibration. The single-ended plain shaft suits couplings that rely on friction or keyed hubs, and the opposite side remains blank because there is no side B shaft extension. This layout helps the motor fit into compact axis groupings where adjacent components leave little room for extra overhang.
Frequently Asked Questions about MDD093C-L-030-N2L-130GB2:
Q: Does the MDD093C-L-030-N2L-130GB2 motor come with a holding brake?
A: The MDD093C-L-030-N2L-130GB2 includes a blocking brake with 22 Nm of torque for holding applications.
Q: What type of shaft and sealing does the MDD093C-L-030-N2L-130GB2 motor have?
A: This motor features a plain shaft with a shaft seal to help prevent the ingress of contaminants.
Q: What is the nominal speed of the MDD093C-L-030-N2L-130GB2 motor?
A: The motor operates at a nominal speed of 3000 min⁻¹, suitable for high-speed motion systems.
Q: What type of feedback does the MDD093C-L-030-N2L-130GB2 motor provide?
A: Digital servo feedback (DSF) is provided for precise position and velocity control in this model.
Q: Where is the connection and what type does the MDD093C-L-030-N2L-130GB2 motor use?
A: The electrical connection is located on Side B of the housing and uses a connector type interface.
