MDD093C-L-030-N2L-130GB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
43 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-130GB1 is a synchronous motor from the MDD Synchronous Motors series. It features a plain shaft with a shaft seal, a centering diameter of 130 mm, and comes equipped with a blocking brake rated for 11 Nm of torque. This motor is designed for surface cooling and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-130GB1 is a synchronous motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for integration with digital drive controllers, it supplies closed-loop torque and speed control to automated machinery and material-handling equipment. The motor acts as the electromechanical link between the power electronics and the mechanical load, translating commanded current into accurate shaft motion for cyclic and continuous-duty tasks on the factory floor.
The rotor is balanced to a standard quality grade so vibration transmitted to adjacent machine components stays within typical servo tolerances. A centering pilot of 130 mm simplifies coaxial mounting to gearboxes or machine frames. Power and feedback conductors exit on Side B, and the factory-fitted connector interface simplifies cable connection. A built-in blocking brake applies 11 Nm of static torque to secure vertical axes when supply power is removed. The aluminum housing is prepared for surface cooling, allowing forced air or plate contact to carry heat away during high-cycle operation. Position data returns through digital servo feedback, giving the controller rotor information for closed-loop correction. A shaft seal is fitted, and the plain shaft is supplied only on the drive side, which is useful where space behind the motor is limited.
In the MDD coding system, length code C indicates a medium active stack, while frame size 093 uses the flange pattern common to this motor family. The motor reaches a nominal synchronous speed of 3000 rpm, allowing direct coupling to ball screws and belt stages driven by 50/60 Hz inverters. Its overall depth remains short, which helps reduce axis spacing in packaging, pick-and-place, and light machining cells that require consistent speed and compact installation.
Frequently Asked Questions about MDD093C-L-030-N2L-130GB1:
Q: Does the MDD093C-L-030-N2L-130GB1 motor include a holding brake?
A: This motor is equipped with a blocking brake that delivers 11 Nm of holding brake torque.
Q: What is the nominal operating speed of the MDD093C-L-030-N2L-130GB1 motor?
A: The nominal speed of the MDD093C-L-030-N2L-130GB1 motor is rated at 3000 min⁻¹.
Q: What is the centering diameter of the MDD093C-L-030-N2L-130GB1?
A: The centering diameter of this motor is 130 mm for precise mounting alignment.
Q: What type of feedback system is used in the MDD093C-L-030-N2L-130GB1 motor?
A: Digital servo feedback (DSF) is used for motor feedback on this model.
Q: How is the housing of the MDD093C-L-030-N2L-130GB1 motor designed for cooling?
A: The motor housing supports surface cooling, which improves heat dissipation during operation.
