Product Description:

The MDD093C-L-030-N2L-130GA2 is a servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it converts regulated electrical power into rotary motion for precise axis positioning, stable speed control, and coordinated movement in automated machinery such as packaging systems and material-handling equipment. Its design supports frequent start-stop operation, making it suitable for axes that must accelerate, decelerate, and hold position repeatedly during normal machine cycles.

At its rated operating point, the motor reaches a nominal speed of 3000 rpm, which suits fast positioning tasks and steady motion in synchronized systems. Installation uses a centering pilot of 130 mm, which helps align the motor accurately with the machine interface and reduces the risk of mounting offset. The frame is identified as motor size 093, so the housing follows the standard proportions of that size class. Power and feedback conductors exit on Side A, which keeps cable routing in one direction and can reduce cable bending near the connection point. The output uses a plain shaft, allowing torque transfer through clamp-style couplings commonly used where low backlash and accurate alignment are important.

Heat is removed through surface cooling, so the housing transfers thermal energy directly to the mounting structure without requiring a separate fan. During power loss or standstill, the integrated blocking brake rated at 22 Nm provides holding torque that can keep a vertical or indexing axis from drifting. Feedback is supplied through digital servo feedback, allowing the drive to monitor rotor position continuously for closed-loop motion control and fault monitoring. A fitted shaft seal helps protect the bearing area from coolant splash and fine dust, which is useful in enclosed production environments where contamination can shorten lubricant life.