MDD093C-L-030-N2L-110PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
5 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-110PL2 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a standard keyway shaft with a centering diameter of 110 mm and a nominal speed of 3000 rpm. The motor includes a connector-type, left-sided connection, a shaft seal, and digital servo feedback. It also comes with a blocking brake providing 22 Nm of holding torque and is built for surface cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-110PL2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated drive current into rotary motion for indexing tables, pick-and-place axes, and other industrial automation points. The construction is sized for medium-frame applications, supplying precise torque and speed under feedback control so that multiple axes can be coordinated directly from the electronic drive without mechanical transmissions. Its layout is well suited to machines that need repeatable motion during frequent starts, stops, and position changes. That makes it suitable for transfer units, feeders, and packaging stations that rely on accurate electronic synchronization between axes.
The mounting interface includes a centering diameter of 110 mm, which positions the stator concentrically on the machine frame and helps keep runout within standard balancing limits. Power, brake, and feedback cables exit on the left side and terminate in a sealed connector, which helps simplify cabinet layout and cable routing. A blocking brake rated at 22 Nm locks the rotor when the controller is disabled, helping prevent axis drift when power is removed. Thermal energy is transferred through a housing prepared for surface cooling, allowing heat to pass into the machine plate instead of relying on forced air. This arrangement leaves the motor exterior unobstructed and supports compact installation near adjacent machine components.
Control accuracy is provided by digital servo feedback (DSF), which returns high-resolution rotor position data to the drive while the motor runs at a nominal speed of 3000 rpm. The shaft uses a keyway for positive torque transmission, and a shaft seal helps block coolant or dust from reaching the output bearing. The motor has a single-ended shaft because side B is not machined, keeping the rear end dedicated to the feedback and connection area. Its C length and 093 frame size give it a housing depth that fits medium-duty axis designs without making the motor unnecessarily bulky.
Frequently Asked Questions about MDD093C-L-030-N2L-110PL2:
Q: Does the MDD093C-L-030-N2L-110PL2 motor come with a holding brake, and what is its torque?
A: This model features a blocking brake that provides a holding torque of 22 Nm.
Q: What kind of feedback does the MDD093C-L-030-N2L-110PL2 provide?
A: The motor is equipped with digital servo feedback (DSF) for precise position and speed data.
Q: What is the centering diameter of the MDD093C-L-030-N2L-110PL2 motor?
A: The MDD093C-L-030-N2L-110PL2 is designed with a centering diameter of 110 mm.
Q: What type of shaft and sealing does the MDD093C-L-030-N2L-110PL2 feature?
A: This motor uses a keyway shaft type without a side B shaft end and includes a shaft seal for added protection.
Q: How is the MDD093C-L-030-N2L-110PL2 motor cooled according to its housing specification?
A: The MDD093C-L-030-N2L-110PL2 supports surface cooling via its specialized housing.
