Product Description:

The MDD093C-L-030-N2L-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into controlled rotary motion for positioning axes, indexing tables, and coordinated motion groups in automated lines. Integrated encoder electronics support closed-loop velocity and torque regulation, so the motor can respond quickly to changing load conditions during repeated motion cycles. This makes the unit suitable for machinery that depends on consistent starts, stops, and speed changes throughout production.

The rotor’s nominal speed is 3000 rpm, which suits applications that need a broad operating range before gearing or drive limits reduce axis speed. A centering diameter of 110 mm seats the motor concentrically against the machine flange for accurate alignment during mounting. The active stack uses size code 093 and length code C, placing the motor in a medium frame with a balance of inertia and continuous torque. Position data is returned through digital servo feedback, allowing the drive to regulate motion without separate external transducers. Heat is removed through a housing prepared for surface cooling, so external airflow or a cooling plate can carry losses away during extended duty.

Power and feedback connectors are placed on the left side, which helps keep cable runs close to cabinet walls or machine frames. The output uses a key-slotted shaft with a shaft seal, which helps retain lubricant and reduce contaminant entry at the shaft opening. Because the unit is supplied without a blocking brake, stationary holding torque must be provided by the drive or by an external clamp when the axis is stopped. Standard dynamic balancing reduces residual vibration during rotation. The single-ended shaft leaves the opposite end free of an output coupling, and the connector arrangement supports orderly routing of motor leads.