MDD093C-L-030-N2L-110PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911268323
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
36 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-110PB1 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a 110 mm centering diameter, a nominal speed of 3000 rpm, and a keyway shaft with a shaft seal. It also has a blocking brake with an 11 Nm holding torque and uses digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-110PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated production lines, machine tools, and material-handling equipment, where commanded current is converted into controlled mechanical torque and speed. Integrated feedback supports closed-loop motion control, and the built-in blocking brake allows the axis to be held at standstill when drive power is removed. It is suited to applications that need accurate starts, stops, and repeatable speed changes during continuous operating cycles.
A 110 mm centering diameter aligns the flange with the machine mounting face for accurate installation. The motor uses Motor Size 093 with Motor Length Code C, giving a compact frame with an extended body length for higher torque capacity. Power and feedback conductors exit through a sealed connector on side B, matching the Side B connection orientation. The output uses a keyway shaft on the drive side, which supports positive torque transmission with standard couplings. This layout fits machines that need precise flange alignment while keeping the cable exit away from the driven load.
The motor has a nominal speed of 3000 rpm, allowing it to cover common servo applications that require fast axis response. For load holding during a stop or power-off condition, the integrated brake provides 11 Nm holding brake torque. Heat is dissipated through a surface-cooled housing, so the motor can operate without a separate forced-air device mounted on the unit. Position and velocity signals are returned through digital servo feedback (DSF) for closed-loop control. A shaft seal helps protect the bearings from splash and dust, which supports lubricant retention and steady feedback performance over time.
Frequently Asked Questions about MDD093C-L-030-N2L-110PB1:
Q: What holding brake torque does the MDD093C-L-030-N2L-110PB1 motor provide?
A: The MDD093C-L-030-N2L-110PB1 features a holding brake with 11 Nm torque, helping to securely hold the load during power-off conditions.
Q: What is the nominal speed specification of the MDD093C-L-030-N2L-110PB1 motor?
A: This model operates at a nominal speed of 3000 min⁻¹, enabling efficient motion cycles.
Q: What is the centering diameter of the MDD093C-L-030-N2L-110PB1 motor?
A: The centering diameter for this motor is 110 mm, ensuring precise mounting alignment in compatible assemblies.
Q: What type of shaft and seal does the MDD093C-L-030-N2L-110PB1 motor have?
A: A standard keyway shaft with shaft seal is provided on the MDD093C-L-030-N2L-110PB1, allowing secure coupling and protection against dust or fluids.
Q: What kind of feedback does the MDD093C-L-030-N2L-110PB1 provide?
A: The MDD093C-L-030-N2L-110PB1 uses digital servo feedback (DSF) for precise position and speed monitoring.
