Product Description:

The MDD093C-L-030-N2L-110PA2 is a three-phase permanent-magnet servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated production lines, where controlled torque and velocity must be delivered to indexing tables, pick-and-place arms, or auxiliary conveyor axes. By combining a compact stator package with internal rotor magnets, the motor provides rapid acceleration and accurate positioning under closed-loop current control. Its compact layout suits machines that need responsive axis motion without using a larger motor body.

Mechanical mounting is centered with a 110 mm pilot, which helps keep the motor concentric with gearboxes or machine fixtures. Power and feedback leads exit on side A, and the stator side wall uses a plug-in connector for a clean electrical interface. A built-in spring-applied brake supplies 22 Nm of static holding torque, which helps keep a vertical axis in place when power is removed. Heat dissipation is enhanced by surface cooling, allowing higher continuous output without exceeding insulation limits. Standard rotor balancing helps reduce vibration at rated speed, and the keyed electrical insert helps keep cable retention stable during continuous motion.

Control accuracy is supported by digital servo feedback (DSF), which sends high-resolution position data to the drive for closed-loop regulation. The electromagnetic design reaches a nominal mechanical velocity of 3000 rpm, matching common inverter output frequencies for packaging and material-handling axes. Torque is transmitted through a keyway, which helps keep the coupling locked to the shaft during repeated starts and reversals. A shaft seal helps protect the bearing chamber against lubricant loss and airborne contaminants. With its 093 frame envelope and C length, the motor fits installations that need moderate power in limited space.